SELLEYS HI-TEMP GASKET MAKER RTV SILICONE GREY 650’F (85 GM)

SELLEYS HI-TEMP GASKET MAKER RTV SILICONE GREY 650'F (85 GM)

Description 

Selleys Acrylic Wall Sealer Seals, conditions and unifies surfaces, to provide a suitable foundation upon which the topcoats can be applied. It is formulated with 100% acrylic polymer, premium-grade titanium dioxide pigments, and special mineral fillers and additives, to ensure adhesion and performance of subsequent topcoats. 

Ideal For

• Crankshaft gasket
• Oil pumps
• Gearboxes and pumps
• Water pumps

Features 

• Forms gaskets instantly from the tube – any size, any shape. 
• Instants gasket cures to a tough Silicone. 
• Rubber which outperforms and replaces conventional paper, cork, or rubber gaskets. 
• Instant gasket flows into every space or unevenness between surfaces perfectly for a tough and high-pressure seal. 
• Resist high temperatures. 
• Resist aging, water, oil, grease, and vibration. 

Direction 

• Remove old gasket material from mating surfaces and clean with turpentine or petrol. If adhesion of the gasketing is not required, wipe mating surfaces with an oily cloth.
• Pierce blind seal in a tube, fit nozzle, and cut to the required size; eg. 3mm for stamped parts and 1.5mm for cast parts. Squeeze a bead of sealant onto one of the surfaces to be joined, around the perimeter of the part, and around bolt holes.
• Join the parts together within 10 minutes and bolt down to the desired torque. If the thicker gasket is required, assemble but do not tighten bolts for 24 hours. Material cures in 48 hours. (when disassembly is required, pry the two flanges apart and remove the old sealant before reassembly.). 
• After use removes the nozzle and replaces the cap. Allow the sealant to cure in the nozzle and remove it before the next use.

Safety Tips 

• On contact, an uncured sealant can irritate skin and eyes. If in eyes, wash out immediately with water. The product releases acetic acid while curing. Keep out of reach of children.