SELLEYS ALL FIX GLUE 80G (MULTIPURPOSE HOUSEHOLD GLUE)

SELLEYS ALL FIX GLUE 80G (MULTIPURPOSE HOUSEHOLD GLUE)

Selleys All Fix is a solvent free, high strength adhesive with instant (fast) grab* on porous surfaces that eliminates the need for nails and screws in many jobs. It has a thick, non-runny consistency that will bond a wide variety of materials.

Features

• Instant grab* on porous surfaces
• High final strength
• Correctable within 5-10 minutes
• No solvent fumes, safe and easy to use
• Non-flammable
• Fills minor gaps in uneven surfaces (bridges gaps up to 10mm)
• Cleans up easily with water while still wet
• Overpaintable

Where can this product be used?

• Skirting boards
• Architraves
• Plasterboard
• Wall panelling
• Chair (dado) rails
• Cabinets
• Plaster coving
• Carpet and carpet grippers

What materials is this product suitable for?

• Wood
• Particle board
• Metals
• Glass
• Ceramics
• Brick
• Concrete
• Cork
• Polystyrene foam
• UPVC
• Many rigid plastics

How to use : 

1. Surfaces to be bonded must be dry, sound and free from grease/oil and dust.
2. Cut tip off cartridge, fit nozzle and cut at 45° to desired opening (approx 5-6mm diameter). Place in cartridge gun to extrude contents.
3. Form bonds immediately by pressing parts firmly together. Bonds can be re-positioned within 5-10 minutes after forming.

Limitations:

• Not suitable for bonding plastics such as polyethylene, polypropylene, other flexible plastics and rubbers.
• Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
• Warped panels may need holding or nailing until adhesive dries.
• Not resistant to strong acids and strong organic solvents.
• In cold or damp weather and between non-porous materials, drying time is greatly extended.
• Do not apply below 10°C.
• Thick applications take longer to dry than thin applications.
• Not suitable for fixing mirrors.
• Not suitable for sanding.
• Do not store below 0°C.
• *Instant grab may not support very heavy items, particularly on uneven surfaces or smooth non-porous surfaces. In these cases, temporary support will be required until adhesive dries.
• When used near brass or copper, the immediate area of contact will discolour to a blue tone.
• Selleys All Fix can stain slightly and colour can be paler than surrounding area, squeeze out should be wiped off to prevent stains.

Handy tips:

• Always form bonds with wet adhesive. If adhesive surfaces dry, no bond will form. (Scrape off and re-apply adhesive.)
• On porous surfaces bonds will have good strength after 24 hours and continue to harden for a few days. If both surfaces are non-porous, drying time is greatly extended (more than 7 days).
• Wet, damp and cold weather will increase drying time.
• For long narrow attachments (eg. skirting, architraves, etc.) apply one or two continuous beads along the back of the item.
• For sheets to battens, apply continuous bead to the battens.
• For sheets to flat walls, apply beads to the sheet at approx 300mm intervals to within 50mm of the edges.
• For small items (eg. tiles), spots of adhesive can be appropriate.