XTRASEAL MC-807 ACRYLIC LATEX SEALANT GAP FILLER SILICONE – WHITE 450G

ITEM INCLUDED :

XTRASEAL MC-807 ACRYLIC LATEX SEALANT GAP FILLER SILICONE – WHITE 450G

MC-807 is a one component, latex non-staining material that cures into a flexible and tough rubber with good adhesion to porous surfaces without primer gasket. It is also an environmental friendly sealant that can be easily cleaned up with water. Can be painted over in short time with latex or water base paint.

FEATURES:
♦ MORE HARDER
♦ PERMANENTLY FLEXIBLE.
♦ ONE PART NO MIXING.
♦ ENVIRONMENTAL FRIENDLY, EASILY CLEAN UP WITH WATER.
♦ EXCELLENT GUNNABILITY (5°C TO 50°C).
♦ GOOD ADHESION TO WOOD, CONCRETE AND MARBLE

USES:
♦ SUITABLE FOR CARGO CONTAINER AND CABIN.
♦ GENERAL GLAZING: WOOD, CONCRETE,MARBLE AND ETC.
♦ DIY APPLICATION: GUTTERS, JOINTS AROUND DOORS AND WINDOWS, SKYLIGHTS, AIRCONDITIONING.
♦ ENERGY SAVE APPLICATION: TO SEAL AIR DRAFT AROUND AIR CONDITIONER.

WE RECOMMEND PRELIMINARY COMPATIBILTY TESTS PRIOR TO APPLICATION TO ACHIEVE DESIRABLE RESULTS

NOT RECOMMENDED FOR:
IT SHOULD NOT BE APPLIED OUTDOORS IF IT IS LIKELY TO BE RAINED UPON WITHIN 2 HOURS OF APPLICATION.
NOT FOR: USE IN AREAS OF CONSTANT WATER IMMERSION.
NOT FOR: JOINT MOVEMENT MORE THAN 10%.

COLOUR: WHITE. OTHER COLOURS ARE AVAILABLE UPON REQUEST.

APPLICATION:
♦ SURFACE MUST BE CLEAN AND DRY.
♦ MASK SMOOTH SURFACE TO SIMPLIFY CLEAN UP.
♦ USE APPROVED BACK-UP MATERIAL IN JOINT.
♦ CUT NOZZLE TO DESIRED SIZE.
♦ INSERT CARTRIDGE INTO CAULKING GUN.
♦ PUSH SEALANT AHEAD FOR UNIFORM BEAD.
♦ TOOL WITHIN 20 MINUTES.
♦ CLEAN OFF EXCESS SEALANT WITH WATER.

CURING TIME:
MC-807 WILL TACK FREE IN APPROXIMATELY 20 MINUTES AND WILL CURE TO A DEPTH OF 10mm IN 7-14 DAYS. LONGER CURING TIME MAY BE NECESSARY IN COLD AND HIGH HUMIDITY AREA.

SPECIFICATION:
BASE ：ACRYLIC LATEX
APPEARANCE ：NON-SAGGING PASTE
COLOUR ：WHITE
SPECIFIC GRAVITY ：1.65 ± 0.05
SHORE A HARDNESS ：40 APPROX.
SOLID CONTENTS ：85  3 %
TACK FREE TIME ：20 MINUTES APPROX.
APPLICATION TEMP. ：5°C TO 50°C
SERVICE TEMP. ：-10°C TO 80°C
SHELF LIFE ：12 MONTHS

STORAGE:
MATERIAL SHOULD BE STORED IN A DRY AND COOL PLACE BETWEEN +50C TO +300C.