YASEN CERAMIC TILE HOLLOWING AGENT AEROSOL HOLLOW TILE ADHESIVE REPAIR GLUE 700ML (LIQUID TYPE)
Applicable Scope: Suitable for various indoor tiles, such as diamond-faced tiles, vitrified tiles, microcrystalline tiles, faux marble tiles, glazed tiles, and artistic painted tiles. It is also suitable for reattaching skirting boards and wooden floorboards that have come loose.
1. Before construction, confirm that the gaps are smooth and at least 2mm wide. Only then can the permeable hollow tile agent be applied. If the tiles are damp inside, use a hair dryer or similar tool to heat and dry them before application.
2. Extend the nozzle with the glue pipe and bend the pipe at a 90-degree angle. Insert it vertically into the tile gap, then rotate and spray the hollow tile agent onto the back of the tile. Use the entire contents in one go after opening the cap, as the adhesive can easily clog the pipe.
3. After injecting adhesive into tiles that require weight for pressing, keep them pressed with a heavy object for about three days. If the adhesive accumulates too thickly on the floor, it will take 2-3 days to solidify, so please be patient!
4. To ensure the construction effect, strictly follow the construction requirements. If you have any questions, please consult customer service.
使用方法:
1.施工前先确认缝隙是否顺畅,且缝隙是否在2mm及以上,方可进行渗透型空鼓剂的施工,如瓷砖内部潮湿可借助吹风机等进行加热烘干等干燥后再进行施工。
2. 扶起喷嘴延长出胶管,将出胶管折成90度直角,垂直放入瓷砖缝隙,随后即可旋转喷射瓷砖空鼓剂至瓷砖背面,开盖后请一次性使用完毕,否则胶料易堵塞出胶管
3.需用重物按压的瓷砖注胶后用重物一直按压3天左右,地面胶体堆积过厚凝固需要2-3天,需耐心等待!
4.为保障施工效果,请严格按照施工要求施工,有疑问请咨询客服
适用范围:
适用于室内各类瓷砖,例如:金刚面瓷砖,玻化砖,微晶石转,仿大理石砖,釉面砖,艺术喷绘画瓷砖的脱落粘接以及踢脚线地板脱落,木质地板粘接等。
SPECIFICATION:
Brand: Yasen
Volume: 700ml
Tile Hollowing Agent (Filling Type)
Shelf Life: 18 months
Construction Method: Pressurized Self-Spray Application
Applicable Scope: Indoor tiles (hollowing, loosening, warping edges)
Storage Method: Room temperatur
Initial drying time : 12 hours
Adjustment time : 4 hours
Drying time : 24-72 hours
Water resistance : Good
Reviews
There are no reviews yet.