WEBERSET BELCEM SUPERSTAR CERAMIC TILE ADHESIVE INTERNAL & EXTERNAL AREAS CEMENT GUM 20KG

Premium grade Ceramic Tile adhesive for internal and external area, mix with weber's range of Latex Admixture for Porcelain tile fixing. 

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
• Spread adhesive to the substrate at bed thickness of 3 – 6 mm (may vary depending on tile size & thickness) with suitable notched trowel.
• Spread no more than 1m2 at a time to avoid Skin-Over.
• Promptly fix tiles onto adhesive bed, followed by slight twisting
• action to ensure good contact ie, Solid Bed Fixing.
• Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
• Allocate joints of approx. 2 – 3 mm wide between tiles.
• Remove surplus adhesive from tile surface & joints before it hardens.
• Set for 24 hours; before grouting commences.

Features and benefits

• Premium grade C1 Tile Adhesive
• Excellent bond strength
• Contains 100% Silica sand filler
• Idea for swimming pool & wet area

Constraints

• Bed thickness : 3 – 6mm
• Application temperature above 5°C-50°C
• Open time : Approx. 15 – 20 Minute
• Setting time is 24 hours
• Adjustability Time : 10 minutes – May vary depending on porosity of substrate.
• Mix Proportion : 1 pbw water to 3 pbw adhesive (6 – 7 ltrs Water or Latex Admixture to 20kg weberset super star)
• Shelf life : 6 month