PENTENS WP PRIMER T-007 CEMENT MODIFIER (1KG)

Description

PENTENS T-007 is a 100% acrylic cement modifier based on a proven 100% acrylic polymer designed to improve the chemical, corrosion, moisture, and salt resistance of cement renders. It is superior compared to most PVA and SBR-based modifiers because of its superior durability and resistance to hydrolysis. It has been specially formulated for use in high alkaline cement environments. Cement mortars based on PENTENS T-007 will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete.

Features

• Increase the durability of concrete and mortars
• Suitable for use in contact with drinking water
• Great resistance against acids, alkalis, fats & oils
• Increase abrasion resistance
• Increase tensile, flexural, impact & compressive strengths
• Can be applied in thin coats
• Promotes superior adhesion compared to PVA & SBR

Areas of application include:

• As a primer for water-based waterproofing/flooring works
• Repairs to drinking water and wastewater concrete structures
• Repairs and resurfacing of factory floors and driveaways
• Angle fillets
• Multi-purpose adhesive

Instruction of Use:

Surface Preparation

1. All surfaces must be clean, free from grease, oil & laitance. Remove all dirt and contaminants which might affect adhesion
2. Substrates should be primed with a 1:3 mixture of PENTENS T-007 & water
3. Brush on to the surface at an approximate rate of 0.2kg/m²
4. Allow it to become tacky before applying the topping
5. For porous surfaces, prime with a slurry coat

Safety

Impervious gloves and barrier cream should be used when handling these products. Eye protection should be worn. If contacts with eyes occur, rinse immediately with plenty of water and seek medical advice if symptoms persist. If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin cleanser followed by plenty of soap and water. Do not use solvent. Ensure adequate ventilation when using these products.