MAPEI FUGA FRESCA POLYMERIC PAINT MFF100 WHITE 160G

Fuga Fresca is a ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of cementitious grout joints between tiles.

Fuga Fresca is used to eliminate irregularities in the colour of grout-joints caused, for example, by incorrect application of the mortar, or to eliminate unsightly stains caused during use.

Fuga Fresca is a water-based polymeric, acrylic resin-based paint which, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colour to be produced with lower water absorption that are easy to clean..

RECOMMENDATIONS

• Do not use for external applications or on surfaces subjected to continuous immersion (swimming pools, basins, etc.).

• If the product is used on terracotta floors or on stone material with a porous, absorbent surface, it must only be applied on the joints to avoid staining the tiles.

• Apply the product on cementitious joints which have been cured for at least 48 hours.

• Do not use on epoxy grouts or on expansion joints sealed with silicone or polyurethanebased products.

• Do not use Fuga Fresca to consolidate friable grout or those with poor mechanical strengh due to inadequate hydration.

• If the colour difference between the original colour and the new colour is too great, it may be necessary to apply more than one coat.

APPLICATION PROCEDURE

Dosing canister

Shake the canister well before use. Unscrew the cap and apply the product by pressing the sponge applicator lightly on the surface of the joints, which must be clean and free of loose parts, mould and calcium deposits. Wait a few minutes until the product applied on the joints is dry. Remove any traces of the product from the edges of the tiles using a damp sponge. After use, thoroughly clean the sponge applicator on the canister.

Brand : Mapei
Consistency: thick liquid
Colours: MFF100 White
Density (g/cm³): 1.37
pH: 8
Dry solids content (%): 58
Brookfield viscosity (Pa·s): 10.6
(# 6 – 10 rpm)
Covering capacity (contrast ratio): 96.93
Dirt pick-up (UNI 10792): ΔE* 0.27
Abrasion resistance (DIN 53778): > 10,000 cycles
Weatherometer resistance (ASTM G155), cycle 1: ΔE* 0.04
Application temperature range: from +5°C to +35°C
Ready for foot traffic: 2 hours
Waiting time before cleaning the tiling with water: 24 hours