(BOX) 7.3/8.5MM SHOOTER CONCRETE CEILING ARTIFACT CAP FASTENER RIVET NAIL BULLET PIPE PAKU KONKRIT

(BOX) 7.3/8.5MM SHOOTER CONCRETE CEILING ARTIFACT CAP FASTENER RIVET NAIL BULLET PIPE PAKU KONKRIT

PATTERN : 
A : L BRACKET (8.5MM X 32MM) 50 PCS/BOX
B : M8 SCREW STUD HOLDER (8.5MM X 32MM) 100 PCS/BOX
C : CABLE PIPE 20MM (8.5MM X 32MM) 80 PCS/BOX
D : CABLE PIPE 25MM (8.5MM X 32MM) 80 PCS/BOX
E : CABLE PIPE 32MM (8.5MM X 32MM) 60 PCS/BOX
F : SQUARE (8.5MM X 32MM) 100 PCS/BOX
G : SQUARE (8.5MM X 42MM) 100 PCS/BOX
H : ROUND (8.5MM X 32MM) 100 PCS/BOX
I : ROUND (8.5MM X 42MM) 100 PCS/BOX
J : ROUND SMALL (7.3MM X 32MM) 100 PCS/BOX
K : ROUND SMALL (7.3MM X 42MM)  150 PCS/BOX

FEATURES

– Can be used for ceiling, concrete, steel plate, office ceiling, water pipe fixing, fire pipe installation, exhaust pipe installation, workshop ceiling, etc.
– Stability of each nailing operation reduce the dull phenomenon caused by the failure of a single firing device of the nailing gun, and make nailing safer.
– No large amount of dust, energy saving and environmental friendly.

SPECIFICATIONS

Material: Iron Steel
Finishing : Zinc plated
Size: Please refer pictures
Packing : 150pcs/box

How to choose the right nails?

– Step 1: Please measure the muzzle diameter of your nail gun.
– Step 2: Choose 7.3mm or 8.5mm depending on the muzzle diameter.
– Step 3: Finally choose the type of nail that suits your job needs.

NOTE

– 7.3mm nails are suitable for common nail guns.
– 8.5mm nails are suitable for industrial nail guns.
– Please contact the seller if there is any uncertainty
– CAUTION : KEEP OUT OF REACH OF CHILDREN