VTECH VT-760 WOOD & PARQUET AHESIVE WHITE WALL PAPER WHITE GLUE VT760150 (125ML)

VTECH VT-760 WOOD & PARQUET AHESIVE WHITE WALL PAPER WHITE GLUE VT760150 (125ML)

VT-760 Wood and parquet adhesive is a water based, non-toxic, and noncorrosive adhesive that is excellent for wood bonding application. It features quick setting, superior bonding strength and it bonds variety of porous substrates.

FEATURES
-Ready to use
-Easy to spread
-Non-toxic
-Water-based
-High bond strength
-Fast curing
-Forms thin gapless layer when set
-Solvent-free and low odour

APPLICATION :
Suitable for parquet flooring installation and repair, wood joining, PVC lamination, furniture repair, wooden frames, woodworking projects, etc. NOTE: not for outdoor use

APPLICATION DIRECTION
Substrate Preparation:
1. Substrates must be dry, absorbent, level, sound, free of dust, loose particles, paint, wax, oil, rust, and traces of gypsum.
2. The moisture content of the screed must be lower than the maximum prescribed by the timber manufacturer.
3. Check moisture throughout the entire thickness of substrates, using carbide hygrometer.
4. Floating screeds over insulation or light weight layers (e.g. light weight concrete) and slabs on grade must be provided with a moisture barrier to prevent rising damp.
5. To repair cracks in the substrate, consolidate screeds and level uneven screeds.

Adhesive Applications:
1. Stir the adhesive before using. Remove the skin surface if any.
2. Apply the adhesive to the substrate with notched trowel suitable to the format.
3. The open time is 30 minutes under normal temperature (10 °C to 40 °C) and humidity conditions, which must be taken into consideration when applying the adhesive.
4. If skin forms on the adhesive before parquet installation, the adhesive must be removed and replaced.

Parquet Installation
1. The parquet to be installed must be stored in a dry, sheltered area not subject to the vapour condensation and must be insulated from the ground.
2. Check the moisture content of the timber and the ambient humidity before installation.
3. Press the wood parquet firmly onto the wet adhesive to ensure good contact.
4. Leave a gap of approximately 10 mm width around the perimeter, columns, and any elements crossing the floor.
5. Do not bond edges of wood strips together. (follow the parquet manufacturer’s recommendations for installation)

CURING TIME : Floors are set to light traffic after 48 hours. For parquet polishing, wait for at least 10 days to ensure that the wood has reached the proper stability and that the adhesive is completely dry.

CONSUMPTION : Depending on the type of substrates and notched trowel selection, the adhesive consumption range from 0.6 kg to 1. 0 kg / m². For laminated plank, the recommended adhesive coverage is at least 80 %. For solid wood, minimum 95 % adhesive coverage is required.