– User friendly

– Easy application and clean up

– Available in various colours

– Easy maintenance

– Water resistant

 

Packaging : 3.5 kg bag

Colour : Refer to Davcogrout colour chart for the available colour

Shelf life : 6 months from date of production

Storage conditions : Store properly in dry conditions, in undamaged and unopened, original sealed packaging.

 

MIXING

– Pour clean water or Davco Grout Admix Plus RL 1000 into a clean mixing container. Then, add Davcogrout.

– Mix continuously in circular motion using low-speed mechanical mixer until a lump-free, creamy consistency and uniform paste is observed. No extra water should be added.

 

APPLICATION

– Work in small areas at a time.

– With the aid of a rubber grout float, compress the mixture into tile joints. Work diagonally to avoid lifting the grout.

– Ensure that tile joints are fully compacted with grout, as air voids will cause the grout to sink or crack.

– When the grout joints are firm (slightly hardenend), polish the tile surface in circular motion with a clean, damp cloth to remove excessive Davcogrout. Repeat this process until the tile surface clean.

– Allow the grout to cure for at least 48 hours before allowing traffic over it. Setting may be delayed on dense or impervious surface.

 

CLEANING OF EQUIPMENT

– Clean all tools and application equipments with clean water immediately after use. Hardened or cured material can only be removed mechanically.