SAMURAI AEROSOL MOTORCYCLE SPRAY PAINT PR500* 400ML (PAINT REMOVER)

SAMURAI AEROSOL MOTORCYCLE SPRAY PAINT PR500* 400ML (PAINT REMOVER)

*ATTENTION! Not available for East Malaysia. Aerosol products will be rejected at airport.

PR500 is a transparent solution, specialized for removing paint on metal surfaces.

Specification:
Brand : Samurai Paint
Type : Paint Remover
Code : PR500*
Volume: 450ml
Gross Weight: 360g
 

Direcions for use:

1. Remove grease, dirt, rust, moisture or loose paint from the surface to be sprayed. Cover adjacent areas to protect from spray mist.
2. Shake can vigorously until metal agitator, moves freely for 1 minute. Remove plastic cap.
3. Hold can from a distance of 6-8" and point nozzle towards object to be sprayed.
4. Press nozzle firmly and move spray back and forth to deposit an even film of paint.
5. Clean nozzle immediately after use by turning can upside down and pressing nozzle for 5 seconds or until no more paint emerges.
6. If clogging develops, pull nozzle off and clean with thinner. Gently replace nozzle with a twisting motion while holding can away from you.

In order not to spend a lot of time removing the old paint for metal parts, Samurai will show you the simplest and fastest way to remove paint on metal with the PR500 paint remover product line as follows:

Step 1: Spray 2 layers of PR500 on the metal object you want to remove and wait 5-10 minutes
Step 2: After 5-10 minutes, you take a soft plastic sheet and gently rub the paint will automatically wash off, then rinse with water.