PS TAPE ANTI-SLIP & SAFETY TAPE PSAS15 (1” x 15 FEET) (GLOW IN DARK / TRANSPARENT)

PS TAPE ANTI-SLIP & SAFETY TAPE PSAS15 (1'' x 15 FEET) (GLOW IN DARK / TRANSPARENT)

Size : 1'' x 15 Feet (25mm x 4.6meter)

Wet floor surface are a serious risk to health, safety & injuries caused through slips & falls are very common when such condition exists. Therefore, PS Global (International) developed on anti slip & safety Tape (herewith so-called PSAS15) is used to alleviate slip problems on bathtubs, walkways, showers, stairways, terrazzo, marble, slates, pedestrian traffic areas, and platforms.

PSAS15 is to reduce the risk and dangers of slips and the resultant potential of personal injury. Fast food outlets, nursing homes, restaurants, shopping centers, supermarkets, office building, banks, hospitals, hotels, sport centre, pools and spas, country clubs, schools, and colleges are just a selection of facilities that would benefit from PSAS15.

PSAS15 is an excellent performance charactertics, extremely durable, permanent adhesion, and water proofing. Long life and durable. Great traction in both wet and dry area. Its can also help to reduce trip hazards.

Application : With backing paper in place, arrange PSAS15 in desired pattern. For footing, space PSAS15 one to three inches apart. And also, apply to a clean, dry and oil free surface.

Its physicals properties are strong, high quality anti tape that provides a high measure of safety and withstand abuse and heavy traffic. No corrosion appears on metallic surfaces. The texture surface produces a cushioning effect on concrete.
PSAS15 – comprise of a mineral coated plastic film treated on one side with super strong self-adhesive, protected by a paper liner.
Features

-capable of withstand extreme weather
-convenience to apply
-Durable
-Strong resistance to water, motor oil, solvents, and detergents

Attention

-Surface must be clean, flat, & dry
-Once the adhesive line is removed, apply on the surface immediately for adhesive to be fully effectively.
-Allow PSAS15 adhesive to bond for 6 hours before using.

Specification

Unit Size :    Available in 18.25meters (60ft) length, width in between
25mm and 1000mm. available cut into the size required.
Colour :    Transparent / Phosphorescent Yellow
Mineral particles :    Silicon Carbide
Particle size :    200-300 microns
Hardness :    mohs scale 8
Chemicals Resistance :    resistance to water, motor oil, detergent, petrol chemical.
Suitable application :    internal and external.
Withstand Heat :    -10 to 90 C
Shelf Life :    3 years

Attention

Surface must be clean, flat, & dry
Once the adhesive line is removed, apply on the surface immediately for adhesive to be fully effectively.
Allow PSAS15 adhesive to bond for 6 hours before using.