STELLA CRETE BA-888 INTERFACE BONDING AGENT 15LITRE (BA888)

STELLA CRETE BA-888 INTERFACE BONDING AGENT 15LITRE (BA888)

FOR ALL CEMENTITIOUS PRODUCTS
BA-888 is a special formulated homopolymer bonding agent for the latest construction needs like tiles overlay and tiling without back screed. It has special plasticiser agent added to improve bonding strength for various substrates and suitable for all cementitious products

– Tiles overlay solution
– Direct Tiling to concrete wall solution
– Cost Saving & Time Saving
– Water Resistance
– Easy Application
– Excellent Bonding Result
– Environmental Friendly

Where To Use:
-New and old cement plastered surfaces.
-Cemboard, wood, metal, glass, ceramic/porcelain tiles, concrete substrate, brick and marble surfaces.
-Tile on tile; marble on marble or granite on granite
-Designed for indoor application
-Pebble wash to any solid substrate
-Concrete top up
-Metal door and window frames
-Window coping installation

Application Instruction:
-Surface preparation – The surface must be structurally sound and clean. free of oil, grease, wax, dust, sand, dirt, laitance, paints, efflorescence, curing compounds and loose materials of any type. If the surface is questionable, apply a small test patch of BA888; allow to completely dry and observe for any sign of lifting, wrinkling, peeling or curling. If these occured, additional surface preparation is recommended. Recommended cleaning methods by washing or high-pressure water jets.
-BA888 can be applied with paint roller or paint brush
-Do not dilute with water or solvent. Do not add any admixture.
-Do not use water soluble materials such as glue, calcimine, wall paper, casein-based adhesive or where constant moisture is present.
-Never shake and box mix as to entrap air bubbles.
-Approximately 30 minutes of drying time, subsequent activities can be carried out.(eg plastering or tiling). Subsequent application of plastering, skim coating and cement mortar for tiling shall be performed within 14 days provided BA888 condition is clean, dust free, uncontaminated and intact.
-Do not apply to wet surfaces where there may be hydrostatic pressure such as retaining walls and swimming pool.
-Do not apply to frozen or frost covered surface or when temperature is below (10°C)

Product Data:
Packaging : 15 Liter / Pail
Colour : Green
Application Method : Can be applied with paint roller or paint brush
Coverage : Approximately 18m²-20m² / liter depending on the method of application, temperature, porosity and texture of the substrate/ surface.
Drying time : Approximately 30 minutes after applied; depending on the temperature and humidity (18°C-45°C).
Open time : 14 Days
Fire Hazard : Non-flammable
Toxicity : Non-toxic
Shelf Life : 12 Months
Storage : Store in protected areas where ambient temperature is between 50°F-90°F (10°C-37°C)
Clean Up: Cleaning may be accomplished with water immediately after use.

https://www.youtube.com/watch?v=PcpWDnGs2lQ