ITEM INCLUDED :
400W SPRAY DISINFECTION SMOKE MACHINE LD-311/ FOGGING REAGENT 5LTR ( MACHINE ONLY / COMBO SET )
- Effective Fog Output: The fog machine starts after a few minutes warming up and 2-3 meters distance.It is normal if there is condensation on the nozzle of the Fog Machine.
- Environmental Material & Big Capacity: ABS environmental protection materials, more safe metal wire; comes with a 250ml tank for long lasting fog production.
- Easy to use: Operate the machine from a distance using the included wireless remote.
- Durable & Widely cover: The fog machine body in aluminum is good for heat dissipation, it ensures the durability and long lifespan.Creates enough thick fog to fill a room about two garage size requiring no fans to disperse.
Voltage: AC 220-240V/60Hz
Rated Power: 400W
Insurance Limit: 220V@ 5A, 110V@10A
Oil Tank Capacity: 0.25 L
Amount of Spray: 18000 Cuft / min
Warm-up Time: 6min
Spray Distance : 2-3M
Sustained Spray Time: 20-30S
Control: Wirless Remote Control
Suitable Area: About 20 Square
Item Size: 22×11.2×11.8cm
How to Use:
1.Put this product onto a clean, flat, and solid surface that is close to the power socket
2.Unscrew the lid on the tank by turning it counterclockwise and pour the fog liquid inside. Do not spill fog liquid onto the machine body and do not overfill. Screw the lid clockwise to the tank tightly. Always make sure there is enough fog liquid in the tank before using the fog machine
3.Connect the machine with corresponding power socket
4.Warm-up time is approximately 5 minutes. When fully heated, the wired control indication light will turn on and the fog machine will be ready to produce and spray fog
5.Set the ON / OFF switch to ON position, then the nozzle will start spraying fog. Set it to OFF position, the spraying will stop
6.Turn off the machine before refilling the fog machine
-Do not spill fog juice onto the fog machine body and do not overfill its tank. The fog machine must be completely dry before connecting to power.
-Always ensure there is enough fog juice in the tank before using the machine.